 |
|
|
IP Power 9258-PING
|
|
|
The new Aviosys IP Power 9258 Nework Power Controller + PING Function !
Network power controller with 4 power outlet's. Controlled from any location via network (WAN/LAN) or Internet via web browser. Supply maximum up to 7A/250VAC or 10A/120VAC Power by international standard IEC320 Inlet/Outlet. Network server reboot, Web and Wap control.
Sometimes, when your not around, your devices/servers need to be turned on, or sometimes they just need a fresh boot!
Don't waste your time on this anymore and let the IP Power 9258 do the job !
Do not forget to order your Device cables here !
|
|
|
What is PING ?
|
This is the "9258-PING", it can be controlled webbased, but also performs automatic tasks by PING commands !
The new "Aviosys 9258 PING" can ping automatically to other IP-devices (server, computers, etc), totally 4 pcs that are connected. When no reply from the devices, the 9258-PING will automatically restart the corresponding power port for that device. Note : This function can of course only be used with devices that can be ‘pinged’.
Ideal to reset your ADSL modem/router automatically (Watchdog function), or or to automatically reset servers that are crashed.
|
|
|
Product-ID: aviosys 9258S (EU)
 Available from stock
|
115,00 EUR
From 5 pce: 109,25 EUR
From 10 pce: 103,50 EUR
Excl.19% VAT/BTW |
|
What is in the box ? (Click to view)
|
|
What is it ?
|
The IP 9258 can be controlled over TCP/IP network using generic Ethernet or Web browser without any software skill. Each independent outlet can be switched ON, OFF or Booted (OFF- delay-ON). IP9258 can supply maximum up to 7A/250VAC or 10A/120VAC Power. Uses internationally standard IEC 320 Inlet/Outlet connectors that make it easy to use anywhere in the world using locally available PC cables and adapters.
|
Features
|
 |
Network Server reboot. This unit can do remote control to reboot power from PC or Server at a remote site, so no need to send someone to get the job done at site. Saves time and manpower !
|
|
|
Control via integrated webserver
|
|
|
Control via special PING commands
|
|
|
Network AC Power Control. This unit can control and operate the High Power switch on / off via Internet / Ethernet, even the Consumer Electronic 110V / 220 V Products
|
|
|
Timer Power Switch. This unit can pre-set the time schedule to turn device power On/Off thru Internet / Ethernet
|
|
|
WAP Mobile Phone Control. Use your GPRS cell phone via WAP to control devises
|
|
|
Open Code Customization, Source Code provided. You can fit commands in your own system application software
|
|
|
SDK - System Development Toolkit provided
|
|
|
Webpage ( http.) Command - User can modify his own Webpage to command the IP Power 9258 with VB/VC
|
|
|
Firmware always up to date via Internet update
|
|
Specifications
|
|
|
EC320 Connector design, 1 Male Inlet (power in) and 4 Female Power Outlet's (Power output switch via Ethernet)
|
|
|
Installs with standard PC power cords
|
|
|
Total power control up to 10A/120VAC, 10A/240VAC, 7A/250VAC
|
|
|
AC Power switch with power On/Off indication with light
|
|
|
4 pcs LED power switch status indicator
|
|
|
1 pce RJ45 port for Ethernet control
|
|
|
1 pce RS232 port for UART control
|
|
|
Dimension 220mm x 120mm x 45mm, metal case,
|
|
|
Operating Temperature: 0°C to +55°C; Controller dissipates 5 watts max
|
|
Network Functions
|
|
|
Web server design, can be used through the Ethernet or Internet network without computer
|
|
|
Can also be controlled via PING Commands
|
|
|
Support HTTP and DHCP/IP protocol. Windows SDK available
|
|
|
Security password identify to be sure system stability
|
|
|
Watchdog design to avoid network abnormal interruptions
|
|
|
Timer and scheduler design, power can be booted by program
|
|
|
Online update firmware available if necessary
|
|
Retail Package Includes
|
|
|
IP Power 9258 control box
|
|
|
Quick installation Guide
|
|
|
IP 9212 software CD
|
|
|
AC Power Cord
|
|
PING Function Details :
|
|
|
Monitoring the network product connect with 9258
|
|
|
Setup 4 monitoring IP connected with 9258.
|
|
PING Definition :
|
|
|
Definition :
|
|
|
Relay:Power 1 , Power 2 …… Power 8 means the outlet number
|
|
|
Enable ping function (on/off)
|
|
|
Ping IP : Setup the IP address which you would like to ping . IP range: XXX.XXX.XXX.0 ~ XXX.XXX.XXX. 254
|
|
|
NoEcho Count： It means pinging times to be continued when failing to ping device. Range as: 1~231.
|
|
|
BeforeAction Delay (Seconds)：It means the time between first ping which is fail and second ping. Range form1-231. It must be not bigger than the time of AfterAction Delay(Seconds)
|
|
|
AfterAction Delay(Seconds)：It means time from delay action to next ping action.(Range:2-231)
|
|
|
AfterAction：it means to set up the action after second ping as first ping fail .
|
|
|
Continue : Keep ping after the number setting in NoEcho Count
|
|
|
StopPing : Stop ping after the number setting in NoEcho Count
|
|
|
Action：The Action (OFF、ON、Reset(OFFàON) after pinging.
|
|
|
Ping Interval：time from first ping to next. 。( Range 2~9999)
|
|
|
Ping EchoWait：Time for data feedback after ping action. ( Range 20~9999)
|
|
Operation
|
The time of PingEchoWait (name T1) depends on Network Speed situation. Normally the ping time is shorter in Ethernet than in Internet. To promise T1>=10ms, the time of Ping interval (name T2) need check by T1. The time of T2 must be 4 times more than T1 : T2 >= 4 * T1. (4 means the relay number 9258 connect)
The time of AfterAction Delay (Seconds) (Name T3) is based on the time your PC/ Server device turn on，For example : To efficient control the device , if One PC/device need 2 minutes to turn on, the number of T3 should be over 120 second. Besides that，when ping fail to contact with the PC/Server device，after the number/ times set in NoEcho Count, our 9258 will start ping command after time of T3.
The number of NoEcho Count is n，when the times that ping fail to connect with PC /device is up to n , it will act the setting in Action “ON, OFF or RESET”.
|
|
|
|
|
|
|
|
|
|
|
If fail to ping device power1,it will record the times.
|
|
|
Continue to ping and record Power1 failing to ping once.
|
|
|
When NoEcho Count reach scheduled value n , it will stop to ping Power1.
|
|
|
At the same time it will act as scheduled and send out a email for emergency.
|
|
|
When AfterAction Delay time passes, it will ping power1 again. A cycle finished.Fast testing: Select Power1 ENABLE in Ping webpage,192.168.168.168,and fill in 3,2,1,continue Reset. An wrong IP is OK for fast testing.
|
|
|
|
Note:
When enable Ping function.，it is possible that user do not receive the e-mail sent from 9258 to advice 9258`s own .IP address as bandwidth limit.
Please do not use Switchdelay function when enable Ping function.
In webpage ”Setup”, the delayswitch is not relative with Ping function. The “delayswitch” in “ setup” page, is working on “setpower”.
|
Show memo
Contact
