Tracker 212

A universal 5-Digit, low cost universal process and temperature indicator with user linearisation features for 4-20mA signals.

The Tracker 212 is a budget panel meter that supports the features and performance usually found in more expensive indicators. Being quick and easy to configure, with a 5 digit display and 24 point user linearization, the Tracker 212 is well suited to tank contents, process and temperature measurement. You can contact us without obligation to discuss your particular requirements further if you wish.

The Tracker 212 can also accept mV and 10 volt signals. Up to 24 user linearisation points can be entered in any order corresponding to the 4-20mA signals, ideal for tank volume applications. A regulated 10VDC excitation supply is provided for “bridge” type sensors and a 24VDC supply for two wire transmitters and active sensors

The Tracker 212 can be wired directly to thermocouple, RTD’s or temperature transmitters. Select the correct thermosensor type from the menu and the input is automatically scaled and linearised. Temperature is user selectable for display in °C or °F with a resolution of 1.0° or 0.1°

The Tracker 212 is fitted with a relay output with volt free C/O contacts, as standard. The alarm can be high or low acting with user selectable alarm hysteresis and with the relay configurable to be energised or de-energised (fail safe) when in the alarm condition. Two further alarm relays can be fitted as an option.
The analogue output option gives an isolated 4-20mA signal, which is scalable to any portion of the display range. The output is linear to the displayed value, not the input. This makes the Tracker 212 an ideal tank contents transmitter.

The Tracker 212 digital panel meter has one alarm relay fitted as standard and can be fitted with up to 3 alarm relays. You can configure Setpoints at the time of configuration or adjust them using buttons that are hidden behind the front panel. If you want to adjust the setpoints frequently, then front panel buttons can be fitted. You can configure each alarm to be high or low acting.

The Tracker 212 can be setup using the concealed configuration buttons, which are situated behind the front panel, or using the front panel buttons if fitted. The T212 prompts the user for each set-up parameter. For users that need to configure a number of units, a PC compatible configuration program is available for setup, storage and downloading of configurations to the T212. A special adapter lead can be provided to connect an RS232 interface on the computer to the programming jack socket on the rear panel of the Tracker 212.