Accessories

LJTick-Divider Signal Conditioning Module for U3 and UE9
25,00 EUR (Excl.19% VAT/BTW)

LJTick-Current Signal conditionning module, input 4-20 mA to U3/UE9 compatible
38,00 EUR (Excl.19% VAT/BTW)

LJTick-RelayDriver Conditionning module for U3/UE9 to drive relays/ other loads
13,50 EUR (Excl.19% VAT/BTW)

LJTick-InAmp Signal Conditionning module for U3/UE9 with amplifier
46,00 EUR (Excl.19% VAT/BTW)

LJTick-DAC Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per U3/UE9 to add 20 analog outputs.
73,00 EUR (Excl.19% VAT/BTW)

LJTick-Proto Module for Prototyping your own input conditionning for U3/UE9
11,50 EUR (Excl.19% VAT/BTW)

CB15 CB-15 Connection board for U3 / UE9
32,00 EUR (Excl.19% VAT/BTW)

CB25 CB 25 Connection Board for U12
44,50 EUR (Excl.19% VAT/BTW)

CB37-V2.1 CB-37 Connection Board for LabJack UE9
44,50 EUR (Excl.19% VAT/BTW)

RB12 Relay Board Relay Board to connect to U3 and UE9 (does not include relays!)
113,00 EUR (Excl.19% VAT/BTW)

RB16 RB16 Relay Board
110,00 EUR (Excl.19% VAT/BTW)

EB37 + power supply EU EB37 Experiment Board for LabJack UE9 + EU Power Supply 220VAC/50Hz
122,00 EUR (Excl.19% VAT/BTW)

TCK-4 The TCK-4 is a low cost 4-channel type-k thermocouple amplifier unit. The TCK-4 produces a high-level voltage output proportional to input temperature for use with the LabJack U12 and other data acquisition and control systems.
148,00 EUR (Excl.19% VAT/BTW)

EI-1022 Temperature Probe
33,00 EUR (Excl.19% VAT/BTW)

EI-1034 Temperature Probe
53,00 EUR (Excl.19% VAT/BTW)

EI-1040 EI-1040 Dual Channel Amplifer
106,00 EUR (Excl.19% VAT/BTW)

EI-1050 Digital Temperature / Humidity Probe
76,00 EUR (Excl.19% VAT/BTW)

RO-16 8 Channel Relay / Opto Isolator Board
159,00 EUR (Excl.19% VAT/BTW)

USB Cable A-B USB cable, length 1,8 meter
3,00 EUR (Excl.19% VAT/BTW)

DCA-10 Driver for DC-brushed motors
161,00 EUR (Excl.19% VAT/BTW)